Noise Reduction Compression Mount Rubber Isolator Mount with 50 Shore A for Air Compressor Vibration Control
Product Details
Noise Reduction Rubber Isolator
,Compression Mount Anti Vibration
,Air Compressor Vibration Isolator
This noise reduction compression mount anti vibration rubber isolator is made for air compressors, where a rigid machine base turns vibration into a constant low frequency drone through floors and pipework. The compression mount anti vibration isolator places a 50 Shore A natural rubber block between the compressor foot and a steel plate, so the machine settles into the rubber and the structure-borne noise path is broken. Fitting a proper noise reduction rubber isolator under a screw or piston compressor is one of the simplest ways to lower both vibration and the noise radiated from floors and walls.
Because the mount works in pure compression, the load passes straight through the rubber and the isolation behaviour stays predictable no matter how often the compressor loads and unloads. The 50 Shore A hardness is soft enough for low frequency isolation yet firm enough to keep the machine level under load, and the rubber resists oil mist, aging and compression set so the compression mount anti vibration isolator keeps performing in oily compressor rooms. A steel top and base plate gives the noise reduction rubber isolator a captive fixing that will not walk out under vibration.
Compressor operators choose a compression mount rubber isolator when they want a simple, low maintenance fix for noisy floors and tired mounting feet. The anti vibration rubber isolator is equally effective on air receivers, dryers and receiver mounted packages, and it can be matched to lighter or heavier compressor skids by selecting the right load capacity. The outcome is a quieter plant, less floor fatigue and longer compressor bearing life, all from a straightforward noise reduction compression mount.
| Noise Reduction | Structure-borne noise damping |
| Mounting Orientation | Compression Mount |
| Load Capacity | 30–500 kg per mount |
| Hardness | 50 ± 5 Shore A |
| Material | Natural Rubber with Steel Plate |
| Operating Temperature | -35 °C to 95 °C |
| Fixing | Captive Top and Base Bolt |
| Oil Resistance | Oil Mist Resistant Rubber |
| Model | Rubber Diameter (mm) | Rubber Height (mm) | Thread Diameter (mm) | Thread Length (mm) |
|---|---|---|---|---|
| VV8*8 | 8 | 8 | M3 | 6–8 |
| VV 10*10 | 10 | 10 | M4 | 10 |
| VV10*15 | 10 | 15 | M4 | 10 |
| VV 15*8 | 15 | 8 | M4 | 10 |
| VV 15*10 | 15 | 10 | M4 | 10 |
| VV 15*10 | 15 | 10 | M5 | 12 |
| VV 15*15 | 15 | 15 | M4 | 10 |
| VV 15*15 | 15 | 15 | M5 | 12 |
| VV 15*20 | 15 | 20 | M4 | 10 |
| VV 15*20 | 15 | 20 | M5 | 12 |
| VV 20*8 | 20 | 8 | M6 | 18 |
| VV 20*10 | 20 | 10 | M6 | 18 |
| VV 20*15 | 20 | 15 | M5 | 15 |
| VV 20*15 | 20 | 15 | M6 | 18 |
| VV 20*20 | 20 | 20 | M6 | 18 |
| VV 20*25 | 20 | 25 | M6 | 18 |
| VV 20*30 | 20 | 30 | M6 | 18 |
| VV 25*13 | 25 | 13 | M6 | 13 |
| VV 25*15 | 25 | 15 | M6 | 18 |
| VV 25*20 | 25 | 20 | M6 | 18 |
| VV 25*20 | 25 | 20 | M8 | 20 |
| VV 25*25 | 25 | 25 | M6 | 18 |
| VV 25*25 | 25 | 25 | M8 | 20 |
| VV 25*30 | 25 | 30 | M6 | 18 |
| VV 25*30 | 25 | 30 | M8 | 20 |
| VV 25*40 | 25 | 40 | M8 | 20 |
| VV 30*15 | 30 | 15 | M8 | 23 |
| VV 30*20 | 30 | 20 | M8 | 23 |
| VV 30*25 | 30 | 25 | M8 | 23 |
| VV 30*30 | 30 | 30 | M6 | 23 |
| VV 30*30 | 30 | 30 | M8 | 23 |
| VV 30*40 | 30 | 40 | M8 | 23 |
| VV 40*20 | 40 | 20 | M8 | 23 |
| VV 40*20 | 40 | 20 | M10 | 25 |
| VV 40*25 | 40 | 25 | M8 | 23 |
| VV 40*25 | 40 | 25 | M10 | 25 |
| VV 40*30 | 40 | 30 | M8 | 23 |
| VV 40*30 | 40 | 30 | M10 | 25 |
| VV 40*40 | 40 | 40 | M8 | 23 |
| VV 40*40 | 40 | 40 | M10 | 25 |
| VV 50*20 | 50 | 20 | M10 | 27 |
| VV 50*25 | 50 | 25 | M10 | 27 |
| VV 50*30 | 50 | 30 | M10 | 27 |
| VV 50*40 | 50 | 40 | M10 | 27 |
| VV 50*45 | 50 | 45 | M10 | 27 |
| VV 50*50 | 50 | 50 | M10 | 27 |
| VV 60*25 | 60 | 25 | M10 | 37 |
| VV 60*25 | 60 | 25 | M12 | 37 |
| VV 60*35 | 60 | 35 | M10 | 37 |
| VV 60*35 | 60 | 35 | M12 | 37 |
| VV 60*40 | 60 | 40 | M12 | 37 |
| VV 60*50 | 60 | 50 | M12 | 37 |
| VV 60*60 | 60 | 60 | M12 | 37 |
| VV 75*25 | 75 | 25 | M12 | 37 |
| VV 75*40 | 75 | 40 | M12 | 37 |
| VV 75*50 | 75 | 50 | M12 | 37 |
| VV 75*50 | 75 | 50 | M16 | 42 |
| VV 100*40 | 100 | 40 | M16 | 46 |
| VV 100*50 | 100 | 50 | M16 | 46 |
| VV 100*55 | 100 | 55 | M16 | 46 |
| VV 100*60 | 100 | 60 | M16 | 46 |
| VV 100*75 | 100 | 75 | M16 | 46 |
| VV 150*50 | 150 | 50 | M16 | 46 |
| VV 150*50 | 150 | 50 | M20 | 46 |
| VV 150*75 | 150 | 75 | M16 | 46 |
| VV 150*75 | 150 | 75 | M20 | 46 |
| No. | Key Advantages |
|---|---|
| 1 | Breaks the structure-borne noise path from compressor to floor. |
| 2 | Pure compression design keeps isolation predictable under varying load. |
| 3 | 50 Shore A hardness isolates low frequency compressor vibration. |
| 4 | Rubber resists oil mist, aging and compression set. |
| 5 | Captive steel plates stop the mount walking under vibration. |
| No. | Application Fields |
|---|---|
| 1 | Screw and piston air compressors |
| 2 | Air receivers, dryers and compressor packages |
| 3 | Workshop machinery on concrete floors |
| 4 | Plant equipment needing noise and vibration control |
A: The noise reduction rubber isolator mainly removes structure-borne noise, the low drone that travels through a rigid floor. Combined with good pipe isolation it can meaningfully quiet a compressor room.
A: For a machine with a vertical load, a compression mount anti vibration isolator is simple and predictable. The load stays in the rubber and the compression mount keeps its height.
A: The compound is chosen to resist oil mist and aging, so the air compressor vibration isolator continues to work in oily compressor rooms.
A: Share the compressor weight and number of feet, and we will size the load capacity of the compression mount and send a quotation.
-
Bolt Rubber Vibration Isolator Mounts Rubber Damper For Industrial Shock Absorption
Bolt Anti Vibration Rubber Vibration Isolator Rubber Damper Rubber Mount for Industrial Shock Absorption The VD Rubber Mount is engineered for effective shock absorption and vibration control. Both the rubber and metal components are corrosion-protected, making the mount suitable for humid and ... -
Male Male Compression Cylindrical Vibration Isolator Mounts Anti Vibration
Cylindrical Male Male Compression Mount Rubber Isolator Mounts Eco-friendly Anti-Vibration Mounts This noise-reduction compression-mount rubber isolator is purpose-built for air compressors, where a rigid machine-to-floor connection would otherwise radiate a constant drone through the building. The ... -
M10 M16 M20 Natural Shock Absorber Rubber Vibration Isolator For Air Compressor
M10 M16 M20 Natural Rubber Shock Absorber and Vibration Isolator for Air Compressor and Motor Silent Block -
Male Female Type Rubber Isolator Mount with Natural Rubber Element and Galvanised Steel Inserts
Male Female Type Rubber Isolator Mount with Natural Rubber Element and Galvanised Steel Inserts Engineered for effective shock absorption and vibration control, the VD Rubber Mount soaks up shock at start-up and shut-down as well as steady-state vibration, extending equipment life. Fans, pumps, ...
