60 Shore A Hardness Rubber Isolator Mount for Generator Set Vibration Isolation with Natural Rubber Shear Element
Product Details
60 Shore A Shear Mount Isolator
,Vibro Isolator Rubber Damper
,Generator Set Vibration Mount
This 60 Shore A hardness shear mount vibro isolator rubber damper is built for generator sets, where engine vibration and frame resonance must be controlled without letting the set drift out of alignment. The vibro isolator rubber damper works mainly in shear, so the rubber element flexes sideways under the running engine and converts vibration into a small, controlled movement instead of passing it into the base frame. A shear mount is often the preferred choice for generator sets because it isolates better in the low frequency band than a plain compression block.
The rubber is set at 60 Shore A hardness, giving the shear mount enough stiffness to carry the generator load while still deflecting enough to isolate engine shake. Because the vibro isolator rubber damper acts in shear, it also softens the transmission of structure-borne noise into building slabs, which helps the whole generator room meet typical noise targets. The natural rubber resists aging, oil and weather, and the metal parts are coated for corrosion resistance, so the generator set vibration mount holds up in both indoor plant rooms and outdoor canopies.
Contractors pick a shear mount vibro isolator when they need a balance of load support and good low frequency isolation for standby and prime power generator sets. The generator set rubber damper is available across a range of load capacities so a single model family can cover small canopy sets up to large containerised units. With a documented 60 Shore A hardness that keeps deflection predictable, this vibro isolator rubber damper delivers steady isolation across the engine speed range.
| Parameter | Value |
|---|---|
| Hardness | 60 +/- 5 Shore A |
| Mounting Orientation | Shear Mount |
| Load Capacity | 50–600 kg per mount |
| Material | Natural Rubber Shear Element |
| Damping | Combined Shear and Compression |
| Operating Temperature | -40 °C to 100 °C |
| Corrosion Protection | Coated Metal Parts |
| Fixing | Two Bolt Through Mount |
| Model | Rubber Diameter (mm) | Rubber Height (mm) | Thread Diameter (mm) | Thread Length (mm) |
|---|---|---|---|---|
| VV8*8 | 8 | 8 | M3 | 6–8 |
| VV 10*10 | 10 | 10 | M4 | 10 |
| VV10*15 | 10 | 15 | M4 | 10 |
| VV 15*8 | 15 | 8 | M4 | 10 |
| VV 15*10 | 15 | 10 | M4 | 10 |
| VV 15*10 | 15 | 10 | M5 | 12 |
| VV 15*15 | 15 | 15 | M4 | 10 |
| VV 15*15 | 15 | 15 | M5 | 12 |
| VV 15*20 | 15 | 20 | M4 | 10 |
| VV 15*20 | 15 | 20 | M5 | 12 |
| VV 20*8 | 20 | 8 | M6 | 18 |
| VV 20*10 | 20 | 10 | M6 | 18 |
| VV 20*15 | 20 | 15 | M5 | 15 |
| VV 20*15 | 20 | 15 | M6 | 18 |
| VV 20*20 | 20 | 20 | M6 | 18 |
| VV 20*25 | 20 | 25 | M6 | 18 |
| VV 20*30 | 20 | 30 | M6 | 18 |
| VV 25*13 | 25 | 13 | M6 | 13 |
| VV 25*15 | 25 | 15 | M6 | 18 |
| VV 25*20 | 25 | 20 | M6 | 18 |
| VV 25*20 | 25 | 20 | M8 | 20 |
| VV 25*25 | 25 | 25 | M6 | 18 |
| VV 25*25 | 25 | 25 | M8 | 20 |
| VV 25*30 | 25 | 30 | M6 | 18 |
| VV 25*30 | 25 | 30 | M8 | 20 |
| VV 25*40 | 25 | 40 | M8 | 20 |
| VV 30*15 | 30 | 15 | M8 | 23 |
| VV 30*20 | 30 | 20 | M8 | 23 |
| VV 30*25 | 30 | 25 | M8 | 23 |
| VV 30*30 | 30 | 30 | M6 | 23 |
| VV 30*30 | 30 | 30 | M8 | 23 |
| VV 30*40 | 30 | 40 | M8 | 23 |
| VV 40*20 | 40 | 20 | M8 | 23 |
| VV 40*20 | 40 | 20 | M10 | 25 |
| VV 40*25 | 40 | 25 | M8 | 23 |
| VV 40*25 | 40 | 25 | M10 | 25 |
| VV 40*30 | 40 | 30 | M8 | 23 |
| VV 40*30 | 40 | 30 | M10 | 25 |
| VV 40*40 | 40 | 40 | M8 | 23 |
| VV 40*40 | 40 | 40 | M10 | 25 |
| VV 50*20 | 50 | 20 | M10 | 27 |
| VV 50*25 | 50 | 25 | M10 | 27 |
| VV 50*30 | 50 | 30 | M10 | 27 |
| VV 50*40 | 50 | 40 | M10 | 27 |
| VV 50*45 | 50 | 45 | M10 | 27 |
| VV 50*50 | 50 | 50 | M10 | 27 |
| VV 60*25 | 60 | 25 | M10 | 37 |
| VV 60*25 | 60 | 25 | M12 | 37 |
| VV 60*35 | 60 | 35 | M10 | 37 |
| VV 60*35 | 60 | 35 | M12 | 37 |
| VV 60*40 | 60 | 40 | M12 | 37 |
| VV 60*50 | 60 | 50 | M12 | 37 |
| VV 60*60 | 60 | 60 | M12 | 37 |
| VV 75*25 | 75 | 25 | M12 | 37 |
| VV 75*40 | 75 | 40 | M12 | 37 |
| VV 75*50 | 75 | 50 | M12 | 37 |
| VV 75*50 | 75 | 50 | M16 | 42 |
| VV 100*40 | 100 | 40 | M16 | 46 |
| VV 100*50 | 100 | 50 | M16 | 46 |
| VV 100*55 | 100 | 55 | M16 | 46 |
| VV 100*60 | 100 | 60 | M16 | 46 |
| VV 100*75 | 100 | 75 | M16 | 46 |
| VV 150*50 | 150 | 50 | M16 | 46 |
| VV 150*50 | 150 | 50 | M20 | 46 |
| VV 150*75 | 150 | 75 | M16 | 46 |
| VV 150*75 | 150 | 75 | M20 | 46 |
| No. | Key Advantages |
|---|---|
| 1 | Shear action isolates generator vibration better in low frequency bands. |
| 2 | 60 Shore A hardness gives stable support with useful deflection. |
| 3 | Softens structure-borne noise into building slabs. |
| 4 | Rubber resists aging, oil and weather for indoor and outdoor use. |
| 5 | Range of load capacities covers small to large generator sets. |
| No. | Application Fields |
|---|---|
| 1 | Standby and prime generator sets |
| 2 | Containerised and canopy gen-sets |
| 3 | Industrial engine packages on base frames |
| 4 | Equipment needing good low frequency isolation |
A: A shear mount vibro isolator flexes sideways, which isolates the low frequency shake of an engine far better than a stiff block, so the generator set rubber damper keeps vibration out of the slab.
A: The 60 Shore A hardness fixes the rubber stiffness, so the shear mount supports the set firmly while still deflecting enough for good isolation across the engine speed range.
A: Yes. The aging and weather resistant rubber and coated metal parts let the generator set vibration mount serve outdoor canopies and containerised sets.
A: Tell us the generator set weight and the number of mounts, and we will recommend the right 60 Shore A shear mount and send a quotation.
-
Bolt Rubber Vibration Isolator Mounts Rubber Damper For Industrial Shock Absorption
Bolt Anti Vibration Rubber Vibration Isolator Rubber Damper Rubber Mount for Industrial Shock Absorption The VD Rubber Mount is engineered for effective shock absorption and vibration control. Both the rubber and metal components are corrosion-protected, making the mount suitable for humid and ... -
Male Male Compression Cylindrical Vibration Isolator Mounts Anti Vibration
Cylindrical Male Male Compression Mount Rubber Isolator Mounts Eco-friendly Anti-Vibration Mounts This noise-reduction compression-mount rubber isolator is purpose-built for air compressors, where a rigid machine-to-floor connection would otherwise radiate a constant drone through the building. The ... -
M10 M16 M20 Natural Shock Absorber Rubber Vibration Isolator For Air Compressor
M10 M16 M20 Natural Rubber Shock Absorber and Vibration Isolator for Air Compressor and Motor Silent Block -
Male Female Type Rubber Isolator Mount with Natural Rubber Element and Galvanised Steel Inserts
Male Female Type Rubber Isolator Mount with Natural Rubber Element and Galvanised Steel Inserts Engineered for effective shock absorption and vibration control, the VD Rubber Mount soaks up shock at start-up and shut-down as well as steady-state vibration, extending equipment life. Fans, pumps, ...
