Continuous Duty Rubber Spring Isolator Air Handling Anti Vibration Spring Mount
Product Details
Continuous Duty Rubber Spring Isolator
,Air Handling Anti Vibration Spring Mount
,Even Heating Vibration Isolation Spring Mount
Engineered for continuous HVAC and pumping duty, this unit decouples machinery from the building structure using a low-frequency spring system, reducing re-radiated noise and the risk of resonant fatigue.
Balanced spring geometry spreads the load evenly, avoiding hot spots and extending service life.
A low natural frequency keeps the spring well below the disturbing frequency of the equipment.
ED baking paint and a nitrile-rubber base resist corrosion and harsh shop-floor conditions.
Suits water pumps, fans, air-handling units, chillers and general industrial machinery.
- Weather-resistant rubber body and galvanised stamped parts resist the elements
- Flexible pedestal base fits a wide range of machinery
- Straightforward bolt-down installation saves maintenance time
- Spring diameter exceeds 0.8 times the depressed height for stable support
- Uniform load distribution across the spring cage reduces wear
- Low natural frequency keeps the unit clear of the operating range
- Adjustable height option lets you fine-tune level after installation
- Compact footprint suits tight mechanical rooms
- Durable powder coating stands up to humid and oily environments
- Designed for continuous duty in HVAC, water and industrial plants
| Model | L | W | A | H | ΦD | Fixing bolts |
|---|---|---|---|---|---|---|
| JD-S | 97.5 | 57.5 | 72.5 | 75 | 55 | M10 |
| JD-M | 145 | 83 | 116 | 154 | 83 | M12 |
| Model | Load range (kg) | Coefficient of elasticity (Kg/mm) | Applicable deflection (mm) |
|---|---|---|---|
| JD-12-S | 6-12 | 0.8 | 15 |
| JD-18-S | 9-18 | 1.2 | 15 |
| JD-30-S | 15-30 | 2 | 15 |
| JD-40-S | 20-40 | 2.7 | 15 |
| JD-55-S | 30-55 | 3.7 | 15 |
| JD-75-S | 40-75 | 5 | 15 |
| JD-90-S | 45-90 | 6 | 15 |
| JD-120-S | 60-120 | 8 | 15 |
| JD-150-S | 75-150 | 10 | 15 |
| JD-200-S | 125-250 | 13.3 | 15 |
| JD-250-S | 125-250 | 16.7 | 15 |
| JD-50-M | 30-50 | 2 | 25 |
| JD-100-M | 50-100 | 4 | 25 |
| JD-150-M | 100-150 | 6 | 25 |
| JD-200-M | 150-200 | 8 | 25 |
| JD-250-M | 200-250 | 10 | 25 |
| JD-300-M | 250-300 | 12 | 25 |
| JD-350-M | 300-350 | 14 | 25 |
| JD-400-M | 300-400 | 16 | 25 |
| JD-450-M | 400-450 | 18 | 25 |
| JD-500-M | 400-500 | 20 | 25 |
| JD-600-M | 500-600 | 24 | 25 |
| JD-700-M | 600-700 | 28 | 25 |
| JD-850-M | 700-850 | 34 | 25 |
| JD-1000-M | 850-1000 | 40 | 25 |
| JD-1200-M | 1000-1200 | 48 | 25 |
- Air-conditioning boxes and centrifugal fans
- Small chilled-water units, pumps and pipework
- Generating sets and general industrial units
We are a factory.
Yes, we can offer the sample free of charge, but the freight cost is not covered.
30% T/T deposit plus the 70% balance by T/T before shipment.
Generally 5–10 days if the goods are in stock, or 15–20 days if the goods are not in stock, depending on quantity.
Yes, we can produce the products according to your drawings to best satisfy your requirements.
Additional Notes
Notes on the 25 mm Load Deflection Spring Vibration Isolator with Corrosion Resistant ED Finish and Low Frequency Spring Isolator Design: size the mount so the rubber still deflects inside its working range once the equipment runs. That balance of load and movement is what turns a good isolator into a quiet, long-lasting installation.
- Grade 8.8 fasteners provide secure, repeatable fixing.
- Load capacity is rated against the actual dynamic load, not just the static weight.
- Suited to equipment running above 1200 rpm, where plain pads fall short.
Retrofitting is straightforward: the threaded fittings match standard metric hardware, so existing base plates usually need no modification. Keeping the machine level after fitting is the one step that most affects the final result. Tell us the equipment weight, speed and the number of supports and we will confirm the correct model and hardness for your layout.
Quick Q&A
Q: Can it be supplied in a custom hardness?
A: Yes, the compound hardness can be adjusted to your load and isolation target.
-
Bolt Rubber Vibration Isolator Mounts Rubber Damper For Industrial Shock Absorption
Bolt Anti Vibration Rubber Vibration Isolator Rubber Damper Rubber Mount for Industrial Shock Absorption The VD Rubber Mount is engineered for effective shock absorption and vibration control. Both the rubber and metal components are corrosion-protected, making the mount suitable for humid and ... -
Male Male Compression Cylindrical Vibration Isolator Mounts Anti Vibration
Cylindrical Male Male Compression Mount Rubber Isolator Mounts Eco-friendly Anti-Vibration Mounts This noise-reduction compression-mount rubber isolator is purpose-built for air compressors, where a rigid machine-to-floor connection would otherwise radiate a constant drone through the building. The ... -
M10 M16 M20 Natural Shock Absorber Rubber Vibration Isolator For Air Compressor
M10 M16 M20 Natural Rubber Shock Absorber and Vibration Isolator for Air Compressor and Motor Silent Block -
Male Female Type Rubber Isolator Mount with Natural Rubber Element and Galvanised Steel Inserts
Male Female Type Rubber Isolator Mount with Natural Rubber Element and Galvanised Steel Inserts Engineered for effective shock absorption and vibration control, the VD Rubber Mount soaks up shock at start-up and shut-down as well as steady-state vibration, extending equipment life. Fans, pumps, ...
