Anti Vibration Rubber Mount and Compression Mount Rubber Isolator with Oil Resistant Natural Rubber for Vibration Mount
Product Details
Galvanised Steel Inserts
,Low Compression Under Load
,High-Strength Grade 8.8 Screws
With no shear or tension components to account for, this design is simple, robust and largely maintenance-free once the machine has been levelled. Compressor operators choose a compression-mount rubber isolator as a low-cost, dependable fix for noisy fans, pumps and packaged units on rigid floors. The natural-rubber compound resists oil mist, coolant and ageing, so the isolator keeps performing even in an oily plant room.
Compression mounts tolerate the vertical loads typical of reciprocating compressors without the creep seen in shear designs. Because the load path is direct, heat build-up in the rubber is low and the element ages slowly.
Maintenance teams appreciate a component that needs no adjustment, lubrication or periodic replacement. The mount also damps the shock that accompanies compressor start-up, cutting the peak loads seen by the motor and frame.
| Noise Reduction | Structure-borne noise damping |
| Mounting Orientation | Compression Mount |
| Load Capacity | 30–500 kg per mount |
| Hardness | 50 ± 5 Shore A |
| Material | Natural Rubber with Steel Plate |
| Operating Temperature | -35 °C to 95 °C |
| Fixing | Captive Top and Base Bolt |
| Oil Resistance | Oil Mist Resistant Rubber |
| Model | Rubber Diameter (mm) | Rubber Height (mm) | Thread Diameter (mm) | Thread Length (mm) |
|---|---|---|---|---|
| VV8*8 | 8 | 8 | M3 | 6–8 |
| VV 10*10 | 10 | 10 | M4 | 10 |
| VV10*15 | 10 | 15 | M4 | 10 |
| VV 15*8 | 15 | 8 | M4 | 10 |
| VV 15*10 | 15 | 10 | M4 | 10 |
| VV 15*10 | 15 | 10 | M5 | 12 |
| VV 15*15 | 15 | 15 | M4 | 10 |
| VV 15*15 | 15 | 15 | M5 | 12 |
| VV 15*20 | 15 | 20 | M4 | 10 |
| VV 15*20 | 15 | 20 | M5 | 12 |
| VV 20*8 | 20 | 8 | M6 | 18 |
| VV 20*10 | 20 | 10 | M6 | 18 |
| VV 20*15 | 20 | 15 | M5 | 15 |
| VV 20*15 | 20 | 15 | M6 | 18 |
| VV 20*20 | 20 | 20 | M6 | 18 |
| VV 20*25 | 20 | 25 | M6 | 18 |
| VV 20*30 | 20 | 30 | M6 | 18 |
| VV 25*13 | 25 | 13 | M6 | 13 |
| VV 25*15 | 25 | 15 | M6 | 18 |
| VV 25*20 | 25 | 20 | M6 | 18 |
| VV 25*20 | 25 | 20 | M8 | 20 |
| VV 25*25 | 25 | 25 | M6 | 18 |
| VV 25*25 | 25 | 25 | M8 | 20 |
| VV 25*30 | 25 | 30 | M6 | 18 |
| VV 25*30 | 25 | 30 | M8 | 20 |
| VV 25*40 | 25 | 40 | M8 | 20 |
| VV 30*15 | 30 | 15 | M8 | 23 |
| VV 30*20 | 30 | 20 | M8 | 23 |
| VV 30*25 | 30 | 25 | M8 | 23 |
| VV 30*30 | 30 | 30 | M6 | 23 |
| VV 30*30 | 30 | 30 | M8 | 23 |
| VV 30*40 | 30 | 40 | M8 | 23 |
| VV 40*20 | 40 | 20 | M8 | 23 |
| VV 40*20 | 40 | 20 | M10 | 25 |
| VV 40*25 | 40 | 25 | M8 | 23 |
| VV 40*25 | 40 | 25 | M10 | 25 |
| VV 40*30 | 40 | 30 | M8 | 23 |
| VV 40*30 | 40 | 30 | M10 | 25 |
| VV 40*40 | 40 | 40 | M8 | 23 |
| VV 40*40 | 40 | 40 | M10 | 25 |
| VV 50*20 | 50 | 20 | M10 | 27 |
| VV 50*25 | 50 | 25 | M10 | 27 |
| VV 50*30 | 50 | 30 | M10 | 27 |
| VV 50*40 | 50 | 40 | M10 | 27 |
| VV 50*45 | 50 | 45 | M10 | 27 |
| VV 50*50 | 50 | 50 | M10 | 27 |
| VV 60*25 | 60 | 25 | M10 | 37 |
| VV 60*25 | 60 | 25 | M12 | 37 |
| VV 60*35 | 60 | 35 | M10 | 37 |
| VV 60*35 | 60 | 35 | M12 | 37 |
| VV 60*40 | 60 | 40 | M12 | 37 |
| VV 60*50 | 60 | 50 | M12 | 37 |
| VV 60*60 | 60 | 60 | M12 | 37 |
| VV 75*25 | 75 | 25 | M12 | 37 |
| VV 75*40 | 75 | 40 | M12 | 37 |
| VV 75*50 | 75 | 50 | M12 | 37 |
| VV 75*50 | 75 | 50 | M16 | 42 |
| VV 100*40 | 100 | 40 | M16 | 46 |
| VV 100*50 | 100 | 50 | M16 | 46 |
| VV 100*55 | 100 | 55 | M16 | 46 |
| VV 100*60 | 100 | 60 | M16 | 46 |
| VV 100*75 | 100 | 75 | M16 | 46 |
| VV 150*50 | 150 | 50 | M16 | 46 |
| VV 150*50 | 150 | 50 | M20 | 46 |
| VV 150*75 | 150 | 75 | M16 | 46 |
| VV 150*75 | 150 | 75 | M20 | 46 |
| No. | Key Advantages |
|---|---|
| 1 | Breaks the structure-borne noise path from compressor to floor. |
| 2 | Pure compression design keeps isolation predictable under varying load. |
| 3 | 50 Shore A hardness isolates low frequency compressor vibration. |
| 4 | Rubber resists oil mist, aging and compression set. |
| 5 | Captive steel plates stop the mount walking under vibration. |
| No. | Application Fields |
|---|---|
| 1 | Screw and piston air compressors |
| 2 | Air receivers, dryers and compressor packages |
| 3 | Workshop machinery on concrete floors |
| 4 | Plant equipment needing noise and vibration control |
Airborne noise is only part of the story; the mount targets the structural route that carries the rumble into the building.
For a machine with a mainly vertical load, a compression mount is simple and predictable because the load passes straight through the rubber.
Oil-resistant rubber is used specifically so that mist, drips and coolant do not degrade the element.
Simply provide the machine weight and number of feet and we will recommend the right capacity.
Additional Notes
About the Anti Vibration Rubber Mount and Compression Mount Rubber Isolator with Oil Resistant Natural Rubber for Vibration Mount: this vibration isolator is selected for how the machine behaves in service, not only for its dead weight. The elastic element works in compression and shear, so it controls both the steady hum and the shock of start-up.
- Load capacity is rated against the actual dynamic load, not just the static weight.
- Galvanised steel hardware keeps thread strength high through repeated maintenance.
- Suited to equipment running above 1200 rpm, where plain pads fall short.
Because the rubber carries load in two directions at once, the same body can be tuned for a light fan or a heavier machine simply by changing the compound hardness. That is why the load rating and the running speed matter more than the mount's size on its own. Send your application details and our engineers will recommend a rating that keeps vibration and noise within your target.
Quick Q&A
Q: Can it be supplied in a custom hardness?
A: Yes, the compound hardness can be adjusted to your load and isolation target.
-
Bolt Rubber Vibration Isolator Mounts Rubber Damper For Industrial Shock Absorption
Bolt Anti Vibration Rubber Vibration Isolator Rubber Damper Rubber Mount for Industrial Shock Absorption The VD Rubber Mount is engineered for effective shock absorption and vibration control. Both the rubber and metal components are corrosion-protected, making the mount suitable for humid and ... -
Male Male Compression Cylindrical Vibration Isolator Mounts Anti Vibration
Cylindrical Male Male Compression Mount Rubber Isolator Mounts Eco-friendly Anti-Vibration Mounts This noise-reduction compression-mount rubber isolator is purpose-built for air compressors, where a rigid machine-to-floor connection would otherwise radiate a constant drone through the building. The ... -
M10 M16 M20 Natural Shock Absorber Rubber Vibration Isolator For Air Compressor
M10 M16 M20 Natural Rubber Shock Absorber and Vibration Isolator for Air Compressor and Motor Silent Block -
Male Female Type Rubber Isolator Mount with Natural Rubber Element and Galvanised Steel Inserts
Male Female Type Rubber Isolator Mount with Natural Rubber Element and Galvanised Steel Inserts Engineered for effective shock absorption and vibration control, the VD Rubber Mount soaks up shock at start-up and shut-down as well as steady-state vibration, extending equipment life. Fans, pumps, ...
